LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2001 >> SL2 Automatic, MP6 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Induction System >> Removal & Installation >> Accelerator Pedal, Shaft And Bracket Assembly (SOHC/L24 & DOHC/Ll0) >> Removal

Accelerator Pedal, Shaft And Bracket Assembly (SOHC/L24 & DOHC/Ll0): Removal

NOTE: The accelerator pedal and lever assembly are serviced as a unit.
  1. Raise vehicle.
  2. Remove bracket assembly attaching nuts and discard.
    NOTE: To prevent leaks, the bracket assembly attaching nuts must be replaced whenever they are removed.
  3. Lower vehicle.
  4. Disconnect accelerator control cable from accelerator pedal assembly.
  5. Release cruise control cable from accelerator pedal assembly when applicable. Remove accelerator pedal assembly.
scientia non olet · About LEMON Manuals