Removal & Installation - Wagon
- Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM .
- Remove A-pillar trim. Remove sun visors. Remove upper B-pillar trim. Remove C-pillar trim and rear header trim panel. Remove coat hooks.
- Pull headliner down slightly. Disconnect front and rear dome light wiring harness connectors. Carefully disengage Velcro® attaching strips. Lower headliner and remove through rear opening.
- To install, reverse removal procedure. Activate air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM . Check system for proper operation. See SYSTEM OPERATION CHECK .