LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2001 >> SC2 Automatic, MP6 >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Induction System >> Removal & Installation >> Accelerator Pedal, Shaft And Bracket Assembly (SOHC/L24 & DOHC/Ll0) >> Installation

Accelerator Pedal, Shaft And Bracket Assembly (SOHC/L24 & DOHC/Ll0): Installation

  1. Install bracket assembly onto dash panel. Attach accelerator control cable to accelerator pedal.
  2. Attach cruise control cable to accelerator pedal assembly when applicable.
  3. Raise vehicle. Install new bracket assembly attaching nuts.

    Torque: 

    Accelerator Bracket Assembly-to-Front of Dash Nuts: 12 N.m (106 in-lbs) 

  4. Lower vehicle. Check accelerator control assembly for binding.
scientia non olet · About LEMON Manuals