LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2000 >> SL2 Automatic, MP7 >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Rear Brake Pads & Caliper >> Removal

Rear Brake Pads & Caliper: Removal

  1. Raise and support vehicle. Remove wheel. Disconnect brake hose and parking brake cable from caliper (if necessary). Plug openings. Using Cable Remover (SA9151BR), remove cable from cable bracket (if necessary). Remove lock pin and guide pin.
  2. Remove caliper from caliper support and wire aside. DO NOT damage pin boots. Remove brake pads from caliper support. See Figure . Remove and discard pad clips. Check condition of lock pin, guide pin, pin boots and piston boot. Replace if damaged, deteriorated or corroded. DO NOT try to polish corrosion from pins.
scientia non olet · About LEMON Manuals