LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2000 >> SC2 L4-1.9L DOHC VIN 7 >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Camshaft, Lifters and Push Rods >> Camshaft >> Service and Repair >> Camshaft Replacement In-Vehicle (Front Cover In Place)

Camshaft Replacement In-Vehicle (Front Cover In Place)


- Tools Required
- J43299 Camshaft Holder

NOTICE: The service tool J43299 must be used to remove one or both camshafts at the same time. The engine's crankshaft can not be rotated with the camshaft(s) removed.





The DOHC (LL0) engine's camshafts, lash adjusters, valve springs, and seals can be serviced without removing the engine's exhaust system, vibration damper, front mount, and front cover. The following procedure must be followed to prevent damage to the camshafts, lash adjusters, cylinder head, and timing chain guides.

scientia non olet · About LEMON Manuals