Arm Rest: Service and Repair

REMOVAL




1. Adjust front seat forward in vehicle.
2. Open rear cupholder door.
3. Remove screws at rear of console assembly.




4. Lift up at rear of armrest, then push armrest assembly rearward.
5. Remove armrest assembly.

INSTALLATION




1. Tilt front of armrest down so the front retaining tab will slide under edge of console.
2. Align side tabs.
3. Position hand at rear of armrest.
4. Apply pressure towards front of vehicle while pushing down on armrest assembly.
5. Install screws at rear of armrest and tighten.

Torque: 1.5 N.m (13 in-lbs)

6. Close rear cupholder.