Removal & Installation (Rear - Sedan)
- Remove headline. See HEADLINER . Disconnect rear drain hose from power sun roof assembly drain tray. Remove appropriate side rear quarter trim panels as necessary to access rear drain hose. Remove grommet from spaceframe between rear side window and rear wheelwell. Remove rear drain hose from grommet. Pull rear drain hose out of spaceframe through access in lock pillar area.
- Feed replacement drain hose down through appropriate opening in spaceframe. Hose will appear in the lower drain hose opening in the lock pillar. Pull hose out far enough to install replacement grommet. Install drain hose and grommet into lower spaceframe opening.
- Connect upper end of drain hose to power sun roof assembly drain tray. Check drain hose for leaks. See DRAIN HOSES under ON-VEHICLE SERVICE. To complete installation, reverse removal procedure.