DTC C0060, C0065, C0070, C0075, C0080, C0085, C0090 Or C0095: Abs Solenoid Circuit Malfunction

C0060 - Left Front ABS Solenoid No. 1 Circuit

C0065 - Left Front ABS Solenoid No. 2 Circuit

C0070 - Right Front ABS Solenoid No. 1 Circuit

C0075 - Right Front ABS Solenoid No. 2 Circuit

C0080 - Left Rear ABS Solenoid No. 1 Circuit

C0085 - Left Rear ABS Solenoid No. 2 Circuit

C0090 - Right Rear ABS Solenoid No. 1 Circuit

C0095 - Right Rear ABS Solenoid No. 2 Circuit

The ABS control module controls valve function by grounding the solenoid circuit when necessary. Solenoids No. 1 are outlet valves and solenoids No. 2 are inlet valves. DTC will set if ABS control module detects an open, short to ground or short to voltage on solenoid circuit(s) inside control module. If this condition is present, ABS indicator light will illuminate, ABS will be disabled and Dynamic Rear Proportioning (DRP) will be limited to hold function only. Replace ABS control module as necessary.