LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2000 >> LS1 Automatic >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transaxle Overhaul & Testing - 4T40-E & 4T45-E >> Torque Specifications

Torque Specifications

TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Channel Plate Bolt 10 (14)
Flexplate-To-Crankshaft Bolt
Alero, Cavalier, Grand Am & Sunfire (2.4L) (1)
Alero & Grand Am (3.4L) 61 (83)
Cavalier & Sunfire (2.2L) 55 (75)
Lanos 44 (60)
Malibu (3.1L) 52 (71)
Nubira 48 (65)
Saturn "L" Series (2)
Flexplate-To-Torque Converter Bolt
Daewoo 48 (65)
Except Daewoo 33 (45)
Park/Neutral Position Switch Mounting Bolt & Nut 18 (24)
Shift Selector Lever-To-Transaxle Nut 15 (20)
Side Cover Bolt/Stud 15 (20)
Spacer Plate Bolt 10 (14)
INCH Lbs. (N.m) 
Control Valve Body Assembly Bolt 106 (12)
Drive Sprocket Attaching Screw 106 (12)
Input Speed Sensor Bolt 106 (12)
Intermediate-4th Servo Cover Bolt 106 (12)
Low/Reverse Servo Cover Bolt 106 (12)
Oil Feed Tube Bolt 106 (12)
Oil Pan Bolt 106 (12)
Oil Pump Bolt 106 (12)
Output Speed Sensor Retaining Stud 106 (12)
(1) Tighten to 22 ft. lbs. (30 N.m), and then tighten an additional 45 degrees.
(2) Tighten to 39 ft. lbs. (53 N.m), and then tighten an additional 25 degrees.