LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2000 >> LS1 Automatic >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transaxle Overhaul & Testing - 4T40-E & 4T45-E >> Component Disassembly, Reassembly & Transaxle Reassembly >> Intermediate-4TH & Low/Reverse Servos >> Reassembly

Intermediate-4TH & Low/Reverse Servos: Reassembly

  1. Install servo cushion springs and servo piston onto servo pin. Retain spring and piston by installing snap ring onto servo pin. Install NEW seals onto servo piston and seal cover. Lubricate piston seals with transaxle fluid. Install servo piston assembly into servo cover.
  2. Install servo return spring into transaxle case. Install servo cover and piston assembly over servo return spring. Install 3 servo cover bolts. Tighten bolts to specification. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals