LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2000 >> LS1 Automatic >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transaxle Overhaul & Testing - 4T40-E & 4T45-E >> Component Disassembly, Reassembly & Transaxle Reassembly >> Forward Clutch Assembly >> Notes

Forward Clutch Assembly: Notes

    CAUTION: When removing forward clutch return spring assembly, compress only enough to remove snap ring or forward clutch return spring assembly damage may occur.
  1. Remove snap ring from clutch housing assembly. Remove backing plate, 7 friction plates, 7 steel plates and one waved plate. See Fig 1 . Using Spring Compressor (J-23327), compress forward clutch return spring assembly. Remove snap ring and spring compressor.
  2. Remove forward clutch return spring assembly. Remove forward clutch piston assembly. Inspect forward clutch inner sleeve and seal assembly for damage. If inner sleeve and seal assembly is damaged, place Disc (J-41097-2) on inner hub of clutch housing. Install puller with jaws aligned with slots in inner sleeve and seal assembly. Remove inner sleeve and seal assembly.
Fig 1: Exploded View Of Forward Clutch Assembly
G96H04025Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals