LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2000 >> LS1 Automatic >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transaxle Diagnosis - 4T40-E & 4T45-E >> Diagnostic Tests >> DTC P0758: 2-3 Shift Solenoid Electrical Malfunction >> Circuit Description

Circuit Description

The 2-3 shift solenoid is used to control fluid flow acting on 2-3 shift valve. Solenoid is a normally-open valve that is used in conjunction with 1-2 shift solenoid, to allow 4 different shifting combinations. See SHIFT SOLENOID COMBINATIONS  table. Solenoid is attached to control valve body. Ignition voltage is supplied directly to solenoid through fused circuit. PCM commands solenoid on or off by providing a ground path. DTC P0758 will set when PCM detects a continuous open, short to ground or short to voltage in 2-3 shift solenoid circuit.

scientia non olet · About LEMON Manuals