Cylinder Block
CYLINDER BLOCK SPECIFICATIONS
| Application |
In. (mm) |
| Cylinder Bore |
| Diameter |
| Cylinders No. 1, 2 & 3 |
| Standard |
3.2280-3.2287 (81.990-82.010) |
| Maximum Wear |
3.2297 (82.035) |
| Cylinder No. 4 |
| Standard |
3.2283-3.2291 (82.000-82.020) |
| Maximum Wear |
3.2301 (82.045) |
| Maximum Taper |
.0020 (.050) |
| Maximum Out-Of-Round |
.0020 (.050) |
| Cylinder Liner Protrusion |
| Standard |
Even With Deck |
| Maximum |
.0005 (.013) |
| Piston Protrusion |
| Above Deck Surface |
| Standard |
.0118 (.300) |
| Maximum |
.0149 (.379) |
| Below Deck Surface |
| Standard |
.0026 (.066) |
| Maximum |
.0057 (.145) |
| Minimum Deck Height |
7.4512 (189.26) |
| Maximum Deck Warpage |
| Longitudinal (Lengthwise) |
| Standard |
.003 (.08) |
| Maximum |
.004 (.10) |
| Transverse (Across) |
| Standard |
.0009 (.024) |
| Maximum |
.0020 (.050) |