Diagnostic Procedure
- Determine if DTC's P0740, P0743, P0744, P0756, P0758, P0759, P0761, P0763, P0764, P0766, P0768, P0769, P0781, P0782 or P0783 are present. These flags must be eliminated first as a possible cause for DTC P0741.
- Check actuator operation. See ACTUATOR QUICK CHECK under SELF-DIAGNOSTIC SYSTEM. Operation sound of all actuators should be similar.
- Other causes for DTC P0741 are: internal leakage in TCC apply circuit, low line pressure, stuck converter charge valve, stuck open converter limiting valve and/or missing or damaged converter input shaft O-ring.