Diagnostic Aids
When attempting to diagnose an intermittent problem, use scan tool to review malfunction history information. This data can be used to duplicate a problem.
A malfunctioning 1/4 coil, 1/4 ignition wire or 1/4 spark plug will not cause DTC P0351 and/or P1351 to set. A blown EIS fuse will cause a no-start condition but an IC 1/4 DTC may not set. An IC 1/4 circuit fault may set a cam missing DTC P0340. If engine starts with a fault on the IC circuit, a misfire DTC P0300 may also be set. If there is an open in the IC 1/4 circuit a misfire on those cylinders will occur.