LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 1997 >> SW2 Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 1.9L 4-CYL - VINS [7 & 8] >> Overhaul >> Cylinder Block Assembly >> Fitting Pistons

Fitting Pistons

Measure diameter of piston at a 90-degree angle to piston pin, 3/16" (5 mm) from bottom of piston. Measure diameter of cylinder bore 2 1/2" from top of bore. If oil clearance exceeds specification, bore cylinders and replace pistons with oversize pistons. See PISTONS, PINS & RINGS  table and CYLINDER BLOCK table under ENGINE SPECIFICATIONS. Pistons are available in .0050" (.125 mm) and .0157" (.400 mm) oversize.

scientia non olet · About LEMON Manuals