Camshaft & Camshaft Drive (SOHC)
CAMSHAFT & CAMSHAFT DRIVE (SOHC) SPECIFICATIONS
| Application |
In. (mm) |
| Bore Diameter |
| Standard |
1.7510-1.7520 (44.475-44.500) |
| Maximum |
1.7525 (44.513) |
| Bore Warpage |
| Standard |
.0020 (.050) |
| Maximum |
.0025 (.064) |
| End Play |
| Standard |
.003-.008 (.07-.20) |
| Maximum |
.010 (.25) |
| Camshaft Runout |
| Standard |
.002 (.05) |
| Maximum |
.003 (.07) |
| Journal Diameter |
| Standard |
1.7480-1.7490 (44.399-44.424) |
| Minimum |
1.7470 (44.375) |
| Lobe Lift |
| Standard |
.2531-.2556 (6.428-6.493) |
| Minimum |
.2520 (6.400) |
| Journal Oil Clearance |
| Standard |
.0020-.0040 (.051-.101) |
| Maximum |
.0054 (.138) |
| Timing Chain |
| Inner Diameter |
| Standard |
16.50-16.61 (419.0-422.0) |
| Maximum |
16.77 (426.0) |
| Chain Tensioner Plunger Travel |
| Standard |
.070-.439 (1.77-11.14) |
| Maximum |
.827 (21.00) |