Power

CIRCUIT 92
Battery voltage should be present with ignition in ACC and RUN.

Function: This is the ground wire for the windshield wiper motor/control module in the MIST INT, LO, and Wash speed positions.

Check for OPENS/SHORTS.
Repair as needed.

If this component is good, go to the next item indicated on the chart.

CIRCUIT 96
Function: This is the ground wire for the windshield wiper motor/control module in the HI speed position.

Battery voltage should be present with ignition in ACC and RUN position.

Check for OPENS/SHORTS.

Repair as needed.

If this component is good, go to the next item indicated on the chart.