Flywheel - M/T
Flywheel-to-crankshaft bolts Torque: 80 Nm (59 lb ft).
Pressure Plate bolts tighten using a progressive crisscross pattern to prevent warping of the cover stamping.
- Torque: 25 Nm (18 lb ft).
Flywheel-to-crankshaft bolts Torque: 80 Nm (59 lb ft).
Pressure Plate bolts tighten using a progressive crisscross pattern to prevent warping of the cover stamping.
- Torque: 25 Nm (18 lb ft).