Pressure Plate
Flywheel-to-crankshaft bolts Torque: 80 N.m (59 ft. lbs.).
Pressure Plate bolts tighten using a progressive crisscross pattern to prevent warping of the cover stamping.
- Torque: 25 N.m (18 ft. lbs.).
Flywheel-to-crankshaft bolts Torque: 80 N.m (59 ft. lbs.).
Pressure Plate bolts tighten using a progressive crisscross pattern to prevent warping of the cover stamping.
- Torque: 25 N.m (18 ft. lbs.).