LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 1997 >> SL L4-1.9L SOHC VIN 8 >> Repair and Diagnosis >> Heating and Air Conditioning >> Air Duct >> Service and Repair >> End Cap Assemblies >> End Cap Assembly Removal and Installation

End Cap Assembly Removal and Installation







REMOVAL
1. Remove screws.
2. Carefully pull end cap assembly outward at clip locations.

INSTALLATION
1. Install end cap assembly by pushing in at clip locations.
2. Install and tighten screws.
Torque: 2.2 N.m (20 in-lbs)
scientia non olet · About LEMON Manuals