Fuse Circuits Testing

IGN3 FUSE
Location: I/P junction block
Type: 10A Minifuse
Feeds: Window relay
If one of the following systems is operating normally, the fuse is most likely good.
^ Generator
^ A/C
^ DRL
^ Power windows

If the fuse is blown determine the cause of the blown fuse and repair.

Replace fuse as needed.

If this component is good go to the next item indicated on the chart.

If one of the following systems is operating normally the fuse is most likely good.

PWR CONVCE FUSE
Location: Underhood junction block
Type: 30A Maxifuse
Feeds: Circuit 302

If the following system is operating normally, the fuse is most likely good.
^ Power windows

If the fuse is blown determine the cause of the blown fuse and repair.

Replace fuse as needed.

If this component is good go to the next item indicated on the chart.

SUN FUSE
Location: instrument panel junction block
Type: 15A Minifuse
Feeds: Circuit 580

If the following system is operating normally, the fuse is most likely good.
^ Sunroof

If the fuse is blown determine the cause of the blown fuse and repair.

Replace fuse as needed.

If this component is good go to the next item indicated on the chart.