LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 1996 >> SC2 Automatic, MP7 >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Power Brake Booster >> Removal & Installation

Removal & Installation

  1. Disconnect negative battery cable. Remove air cleaner. On ABS-equipped vehicles, remove battery, battery box and battery tray. On all vehicles, remove master cylinder nuts. Taking care not to bend brakelines, move master cylinder away from booster far enough to allow booster removal. Disconnect vacuum hose from check valve on booster.
  2. Inside vehicle, disconnect booster push rod from brake pedal pin. Remove 4 nuts securing booster to firewall. Remove booster. To install, reverse removal procedure. Tighten master cylinder and booster nuts to specification. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals