Camshaft & Camshaft Drive
CAMSHAFT & CAMSHAFT DRIVE (DOHC)
| Application |
In. (mm) |
| Bore Diameter |
| Standard |
1.1417-1.1428 (29.000-29.026) |
| Maximum |
1.1437 (29.050) |
| Bore Warpage |
| Standard |
.0020 (.050) |
| Maximum |
.0025 (.064) |
| End Play |
| Standard |
.002-.008 (.05-.20) |
| Maximum |
.010 (.25) |
| Camshaft Runout |
| Standard |
.002 (.05) |
| Maximum |
.004 (.10) |
| Journal Diameter |
| Standard |
1.1398-1.1406 (28.950-28.970) |
| Minimum |
1.1388 (28.925) |
| Lobe Lift |
| Intake |
| Standard |
.3528-.3559 (8.960-9.040) |
| Minimum |
.3508 (8.910) |
| Exhaust |
| Standard |
.3409-.3441 (8.660-8.740) |
| Minimum |
.3390 (8.610) |
| Oil Clearance |
| Standard |
.0012-.0030 (.030-.076) |
| Maximum |
.0049 (.125) |
| Timing Chain (Maximum Inner Diameter) |
23.15 (588.0) |
| Chain Tensioner Plunger Travel |
| Standard |
.045-.388 (1.16-9.85) |
| Maximum |
.863 (21.00) |