LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2011 >> 9-5 Turbo6 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Manual Gearbox F40) >> Adjustment Replacement >> Backup Lamp Switch Replacement

Backup Lamp Switch Replacement

WARNING: This page is about a different variant/trim than selected.
Fig 1: Identifying Backup Lamp Switch
G09439344Courtesy of SAAB-SCANIA OF AMERICA, INC.
Callout Component Name
Preliminary Procedure 
Remove the engine shield. Refer to ENGINE SHIELD REPLACEMENT .
1 Backup Lamp Switch
Procedure 
  1. Remove electrical connector.
  2. Install NEW Seal ring.

Tighten 
28 Nm (21 lb ft)
scientia non olet · About LEMON Manuals