Fuse Block Replacement

Fig 1: Removing Fuse Block

Courtesy of SAAB-SCANIA OF AMERICA, INC.

Callout	Component Name
Preliminary Procedure Disconnect the battery positive cable. Refer to BATTERY POSITIVE CABLE REPLACEMENT . Disconnect the battery negative cable. Refer to BATTERY NEGATIVE CABLE REPLACEMENT (GASOLINE) .
1	Front Compartment Fuse Block Positive Cable and Engine Power Supply Cable (Qty: 2) Refer to FASTENER CAUTION . Tighten 12.5 Nm (9.2 lb ft)
2	Fuse Block Terminal Wiring Harness (Qty: 4) Tighten 4.7 Nm (3.5 lb in)
3	Master Fuse Procedure Remove the master fuse from the battery positive splitter.
4	Fuse Block Procedure Unclip and remove the fuse block from the battery.