Front Compartment Fuse Block Housing Replacement

Fig 1: Identifying Front Compartment Fuse Block

Courtesy of SAAB-SCANIA OF AMERICA, INC.

Callout	Component Name
Preliminary Procedure  Disconnect the battery ground negative cable. Refer to BATTERY NEGATIVE CABLE REPLACEMENT (GASOLINE) . Disconnect the battery positive cable. Refer to BATTERY POSITIVE CABLE REPLACEMENT . Remove the front compartment fuse block housing cover. Refer to FRONT COMPARTMENT FUSE BLOCK HOUSING COVER REPLACEMENT . Remove the underhood electrical center or junction block. Refer to UNDERHOOD ELECTRICAL CENTER OR JUNCTION BLOCK REPLACEMENT
1	Wiring Harness Plug (Qty: 3) Procedure  Release the wiring harness plugs.
2	Front Compartment Fuse Block Housing Nut Refer to FASTENER CAUTION . Tighten  22 Nm (16 lb ft)
3	Front Compartment Fuse Block Housing Procedure  Remove the front compartment fuse block housing.