Driver or Passenger Seat Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport)

Fig 1: Identifying Driver/Passenger Seat Components

Courtesy of SAAB-SCANIA OF AMERICA, INC.

Callout	Component Name
Preliminary Procedure  SIR Disabling and Enabling. Refer to SIR DISABLING AND ENABLING . Disconnect the negative battery cable. Refer to BATTERY NEGATIVE CABLE DISCONNECTION AND CONNECTION .
1	Cap
2	Driver or Passenger Seat Belt Fastener Refer to FASTENER CAUTION . Tighten  5 Nm (44 lb in)
3	Seat Belt Tensioner Cover
4	Driver or Passenger Seat Belt
5	Driver or Passenger Seat Fastener (Qty: 2) Procedure  Move front seat high adjuster in middle position. Disconnect the battery. Seat belt release at seat belt tensioner. Disconnect the central wiring harness connector at bottom. Unscrew both fasteners at the rail guide. Remove the front seat out of the vehicle with two persons. Tighten  20 Nm (15 lb ft)
6	Driver or Passenger Seat