LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2011 >> 9-5 Turbo6 >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Equipment >> Adjustment Replacement >> Headlamp Switch Molding Replacement

Headlamp Switch Molding Replacement

Fig 1: Identifying Headlamp Switch Molding
G09435818Courtesy of SAAB-SCANIA OF AMERICA, INC.
Callout Component Name
1 Headlamp Switch Molding
Procedure 
  1. Disconnect the electrical connectors.
  2. If replacing the headlamp switch molding, transfer any parts as needed.
NOTE: Use a flat-bladed plastic trim tool to release the headlamp switch molding from the instrument panel.
scientia non olet · About LEMON Manuals