LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2011 >> 9-5 Turbo6 >> Repair and Diagnosis (Single Page) >> Quick Lookups >> Electrical Component Locations >> OEM Wiring Harness And Component Locations >> Fault diagnosis, symptoms >> Power Outlet Receptacle Malfunction (230V AC) >> Component Testing >> Accessory Power Outlet

Accessory Power Outlet

  1. Ignition OFF, remove the X81B accessory power receptacle - 220V AC.
  2. Test for greater than 1 M Ω between terminal 3 X2 and terminal 3 X1.
  3. If less than the specified range, replace the X81B accessory power receptacle - 220V AC.
  4. Test for less than 3 Ω between the following terminals:
    • The terminal 3 X2 and the applicable receptacle terminal
    • The terminal 3 X1 and the applicable receptacle terminal
  5. If greater than the specified range, replace the X81B accessory power receptacle - 220V AC.
  6. Test for infinite resistance between terminal 1 X1 and terminal 1 X2.
  7. If not the specified value, replace the X81B accessory power receptacle - 220V AC.
  8. Connect an AC powered device to the X81B accessory power receptacle - 220V AC.
  9. Test for less than 3 Ω between terminal 1 X1 and terminal 1 X2.
  10. If greater than the specified range, replace the X81B accessory power receptacle - 220V AC.
scientia non olet · About LEMON Manuals