Terminal Part Information
- Pins: F
- Terminal/Tray: 12191819/8
- Core/Insulation Crimp: C/1
- Release Tool/Test Probe: J-38125-553/J-35616-2A (GY)
- Pins: A-D
- Terminal/Tray: 12191819/8
- Core/Insulation Crimp: Pins A, C, D - E/1
- Core/Insulation Crimp: Pins B, C - 2/1
- Release Tool/Test Probe: J-38125-553/J-35616-2A (GY)
- Terminated Lead: Service by Connector Assembly - 15397579
- Release Tool: Not Available
- Diagnostic Test Probe: Pending
X410 BODY HARNESS TO TAIL LAMP ASSEMBLY-RIGHT HARNESS
| Pin | Wire Color | Circuit No. | Operation | Pin | Wire Color | Circuit No. | Operation |
|---|---|---|---|---|---|---|---|
| A | 0.5 GY/BN | 309 | Right Park Lamp Supply Voltage | A | 0.5 GY/BN | 309 | Right Park Lamp Supply Voltage |
| B | 0.75 BU/VT | 1335 | Right Rear Turn Signal Lamp Supply Voltage (without CV3 or EF7 or Z49) | B | 0.75 BU/VT | 1335 | Right Rear Turn Signal Lamp Supply Voltage (without CV3 or EF7 or Z49) |
| C | 0.5 WH/YE | 7541 | Right Rear Stop Lamp Supply Voltage (without CV3 or EF7 or Z49) | C | 0.5 WH/YE | 7541 | Right Rear Stop Lamp Supply Voltage (without CV3 or EF7 or Z49) |
| 0.75 BU/VT | 1335 | Right Rear Turn Signal Lamp Supply Voltage (with CV3 or EF7 or Z49) | 0.75 BU/VT | 1335 | Right Rear Turn Signal Lamp Supply Voltage (with CV3 or EF7 or Z49) | ||
| D | 0.5 GN/WH | 24 | Backup Lamp Supply Voltage | D | 0.5 GN/WH | 24 | Backup Lamp Supply Voltage |
| E | - | - | Not used | E | - | - | Not used |
| F | 1.5 BK | 3250 | Ground | F | 1.5 BK | 3250 | Ground |