Terminal Part Information
- Terminal/Tray: Pending
- Core/Insulation Crimp: Pending
- Release Tool/Test Probe: Pending
- Pins: 2-14, 18-23, 25-31
- Terminal/Tray: 964269-3/32
- Core/Insulation Crimp: E/1
- Release Tool/Test Probe: J-38125-560/J-35616-3 (GY)
- Pin: 15
- Terminal/Tray: 969079-2/32
- Core/Insulation Crimp: Pending
- Release Tool/Test Probe: J-38125-560/J-35616-3 (GY)
X108 ENGINE HARNESS TO BODY HARNESS (LBS OR LBY)
| Pin | Wire Color | Circuit No. | Operation | Pin | Wire Color | Circuit No. | Operation |
|---|---|---|---|---|---|---|---|
| 1 | - | - | Not used | 1 | - | - | Not used |
| 2 | 0.5 BK/BU | 1271 | Low Reference | 2 | 0.5 BK/BU | 1271 | Low Reference |
| 3 | 0.5 WH/RD | 1164 | 5 Volt Reference | 3 | 0.5 WH/RD | 1164 | 5 Volt Reference |
| 4 | 0.5 YE/WH | 1161 | Accelerator Pedal Position Signal (1) | 4 | 0.5 YE/WH | 1161 | Accelerator Pedal Position Signal (1) |
| 5 | 0.5 BK/VT | 1272 | Low Reference | 5 | 0.5 BK/VT | 1272 | Low Reference |
| 6 | 0.5 BN/RD | 1274 | 5 Volt Reference | 6 | 0.5 BN/RD | 1274 | 5 Volt Reference |
| 7 | 0.5 GN/WH | 1162 | Accelerator Pedal Position Signal (2) | 7 | 0.5 GN/WH | 1162 | Accelerator Pedal Position Signal (2) |
| 8 | 0.5 WH/BU | 6311 | Cruise/ETC/TCC Brake Signal | 8 | 0.5 WH/BU | 6311 | Cruise/ETC/TCC Brake Signal |
| 9 | 0.5 GY/RD | 6109 | Clutch Apply Sensor Voltage Reference (without M36) | 9 | 0.5 GY/RD | 6109 | Clutch Apply Sensor Voltage Reference (without M36) |
| 10 | 0.5 BK/GY | 6110 | Low Reference (without M36) | 10 | 0.5 BK/GY | 6110 | Low Reference (without M36) |
| 11 | 0.5 YE | 6111 | Clutch Apply Sensor Signal (without M36) | 11 | 0.5 YE | 6111 | Clutch Apply Sensor Signal (without M36) |
| 12 | 0.5 BU | 2500 | High Speed GMLAN Serial Data (+) (1) | 12 | 0.5 BU | 2500 | High Speed GMLAN Serial Data (+) (1) |
| 13 | 0.5 WH | 2501 | High Speed GMLAN Serial Data (-) (1) | 13 | 0.5 WH | 2501 | High Speed GMLAN Serial Data (-) (1) |
| 14 | 0.5 GN/VT | 206 | Accessory Wakeup Serial Data (LBS or LBY with MR6) | 14 | 0.5 VT/YE | 5985 | Accessory Wake Up Serial Data |
| 0.5 VT/YE | 5985 | Accessory Wakeup Serial Data (LBY with M36) | |||||
| 15-20 | - | - | Not used | 15-20 | - | - | Not used |
| 21 | 0.5 BU/VT | 1589 | Primary Fuel Level Sensor Signal | 21 | 0.5 BU/VT | 1589 | Primary Fuel Level Sensor Signal |
| 22 | 0.5 BKWH | 1937 | Secondary Fuel Level Sensor Signal (LBS with F46) | 22 | 0.5 BU/WH | 1937 | Secondary Fuel Level Sensor Signal (F46) |
| 23 | 0.5 BK/GN | 6281 | Fuel Level Sensor Low Reference | 23 | 0.5 BK/GN | 6281 | Fuel Level Sensor Low Reference |
| 24-25 | - | - | Not used | 24-25 | - | - | Not used |
| 26 | 0.5 YE/BU | 1578 | Fuel Temperature Signal | 26 | 0.5 YE/BU | 1578 | Fuel Temperature Signal |
| 27 | 0.5 BK/BN | 6062 | Fuel Temperature Sensor Low Reference | 27 | 0.5 BK/BN | 6062 | Fuel Temperature Sensor Low Reference |
| 28 | 0.5 WH/BN | 508 | Water In Fuel Indicator Control | 28 | 0.5 WH/BN | 508 | Water In Fuel Indicator Control |
| 29 | 0.75 BN/GN | 59 | A/C Compressor Clutch Supply Voltage (LBY) | 29 | 0.75 BN/GN | 59 | A/C Compressor Clutch Supply Voltage (LBY) |
| 0.75 BU/BN | 7573 | A/C Compressor Clutch Supply Voltage (LBS) | 0.75 BU/YE | 7573 | A/C Compressor Clutch Supply Voltage (LBS) | ||
| 30 | 0.75 YE/BU | 729 | Electric Variable Displacement Supply (LBY) | 30 | 0.75 BK | 2250 | Ground (LBY) |
| 0.75 BU/YE | 7574 | Electric Variable Displacement Control (LBS) | 0.75 BU/YE | 7574 | Electric Variable Displacement Control (LBS) | ||
| 31 | 0.5 VT/BU | 5294 | Powertrain Main Relay Fused Supply (5) | 31 | 0.75 VT/BK | 739 | Run/Crank Ignition 1 Voltage |
| 32-40 | - | - | Not used | 32-40 | - | - | Not used |