Terminal Part Information
- Terminal/Tray: Pending
- Core/Insulation Crimp: Pending
- Release Tool/Test Probe: Pending
- Pins: 2-14, 18-23, 25-31
- Terminal/Tray: 964269-3/32
- Core/Insulation Crimp: E/1
- Release Tool/Test Probe: J-38125-560/J-35616-3 (GY)
- Pin: 15
- Terminal/Tray: 969079-2/32
- Core/Insulation Crimp: Pending
- Release Tool/Test Probe: J-38125-560/J-35616-3 (GY)
X108 ENGINE HARNESS TO BODY HARNESS (LAU)
| Pin | Wire Color | Circuit No. | Operation | Pin | Wire Color | Circuit No. | Operation |
|---|---|---|---|---|---|---|---|
| 1 | - | - | Not used | 1 | - | - | Not used |
| 2 | 0.5 BK/VT | 1271 | Low Reference | 2 | 0.5 BK/BU | 1271 | Low Reference |
| 3 | 0.5 BN/RD | 1164 | 5 Volt Reference | 3 | 0.5 WH/RD | 1164 | 5 Volt Reference |
| 4 | 0.5 YE/WH | 1161 | Accelerator Pedal Position Signal (1) | 4 | 0.5 YE/WH | 1161 | Accelerator Pedal Position Signal (1) |
| 5 | 0.5 BK/VT | 1272 | Low Reference | 5 | 0.5 BK/VT | 1272 | Low Reference |
| 6 | 0.5 BN/RD | 1274 | 5 Volt Reference | 6 | 0.5 BN/RD | 1274 | 5 Volt Reference |
| 7 | 0.5 GN/WH | 1162 | Accelerator Pedal Position Signal (2) | 7 | 0.5 GN/WH | 1162 | Accelerator Pedal Position Signal (2) |
| 8 | 0.5 BU/WH | 6311 | Cruise/ETC/TCC Brake Signal | 8 | 0.5 WH/BU | 6311 | Cruise/ETC/TCC Brake Signal |
| 9 | 0.5 GN/WH | 6109 | Clutch Apply Sensor Voltage Reference (without M36) | 9 | 0.5 GY/RD | 6109 | Clutch Apply Sensor Voltage Reference (without M36) |
| 10 | 0.5 GN | 6110 | Low Reference (without M36) | 10 | 0.5 BK/GY | 6110 | Low Reference (without M36) |
| 11 | 0.5 GY | 6111 | Clutch Apply Sensor Signal (without M36) | 11 | 0.5 YE | 6111 | Clutch Apply Sensor Signal (without M36) |
| 12 | 0.5 BU | 2500 | High Speed GMLAN Serial Data (+) (1) | 12 | 0.5 BU | 2500 | High Speed GMLAN Serial Data (+) (1) |
| 13 | 0.5 WH | 2501 | High Speed GMLAN Serial Data (-) (1) | 13 | 0.5 WH | 2501 | High Speed GMLAN Serial Data (-) (1) |
| 14 | 0.5 BN/YE | 206 | Accessory Wake Up Serial Data | 14 | 0.5 VT/YE | 5985 | Accessory Wake Up Serial Data |
| 15 | 0.5 WH | 1310 | EVAP Canister Vent Solenoid Control (NT7) | 15 | 1 WH | 1310 | EVAP Canister Vent Solenoid Control (NT7) |
| 16-17 | - | - | Not used | 16-17 | - | - | Not used |
| 18 | 0.5 BU/WH | 890 | Fuel Tank Pressure Sensor Signal (NT7) | 18 | 0.5 BU/WH | 890 | Fuel Tank Pressure Sensor Signal (NT7) |
| 19 | - | - | - | 19 | 0.5 YE/RD | 2709 | 5 Volt Reference (NT7) |
| 20 | 0.5 BN/WH | 419 | Check Engine Indicator Control (NT7) | 20 | 0.5 BN/WH | 419 | Check Engine Indicator Control (NT7) |
| 21 | 0.5 BU/VT | 1589 | Primary Fuel Level Sensor Signal | 21 | 0.5 BU/VT | 1589 | Primary Fuel Level Sensor Signal |
| 22 | 0.5 BU/WH | 1937 | Secondary Fuel Level Sensor Signal | 22 | 0.5 BU/WH | 1937 | Secondary Fuel Level Sensor Signal |
| 23 | 0.5 GN | 6281 | Fuel Level Sensor Low Reference | 23 | 0.5 BK/GN | 6281 | Fuel Level Sensor Low Reference |
| 24 | - | - | Not used | 24 | - | - | Not used |
| 25 | 0.75 OG | 465 | Fuel Pump Primary Relay Control | 25 | 0.75 GN/GY | 465 | Fuel Pump Primary Relay Control |
| 26-28 | - | - | Not used | 26-28 | - | - | Not used |
| 29 | 0.75 BN/GN | 7573 | A/C Compressor Clutch Supply Voltage | 29 | 0.75 BU/BN | 7573 | A/C Compressor Clutch Supply Voltage |
| 30 | 0.75 YE/BU | 7574 | Electric Variable Displacement Supply | 30 | 0.75 BU/YE | 7574 | Electric Variable Displacement Control |
| 31 | 0.5 BK | 39 | Run/Crank Ignition 1 Voltage | 31 | 0.75 VT/BK | 739 | Run/Crank Ignition 1 Voltage |
| 32-40 | - | - | Not used | 32-40 | - | - | Not used |