LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2011 >> 9-5 Turbo6 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> Lighting And Signaling Systems >> Fault diagnosis, symptoms >> Horns Malfunction >> Component Testing >> Horn Test

Horn Test

  1. Ignition OFF, disconnect the harness connector at the P12 Horn assembly.
  2. Install a 15 A fused jumper wire between the control terminal 2 and 12 V. Install a jumper wire between the ground terminal 1 and ground. Verify the P12 Horn emits a clear and even tone.
  3. If the sound emitted is not clear and even, replace the P12 Horn assembly.
scientia non olet · About LEMON Manuals