Static Test
- Ignition OFF, disconnect the harness connector at the S30 Headlamp Switch.
- Switch the headlamp leveling switch in position 0. Test for 2.2-2.4 kΩ between the ignition circuit terminal 9 and the signal terminal 10.
- If not within the specified range replace the S30 Headlamp Switch.
- Switch the headlamp leveling switch in position 1. Test for 1.9-2.2 kΩ between the ignition circuit terminal 9 and the signal terminal 10.
- If not within the specified range replace the S30 Headlamp Switch.
- Switch the headlamp leveling switch in position 2. Test for 1.7-2.1 kΩ between the ignition circuit terminal 9 and the signal terminal 10.
- If not within the specified range replace the S30 Headlamp Switch.
- Switch the headlamp leveling switch in position 3. Test for 1.4-1.7 kΩ between the ignition circuit terminal 9 and the signal terminal 10.
- If not within the specified range replace the S30 Headlamp Switch.