LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2011 >> 9-5 Turbo6 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> Lighting And Signaling Systems >> Fault diagnosis, symptoms >> Automatic Light Malfunction >> Component Testing >> Static Test

Static Test

  1. Ignition ON, observe the scan tool Ambient Light Sensor parameter. The reading should be between 1.4-4.5 V and change with ambient light changes.
  2. Test the B10B Ambient Light/Sunload Sensor by varying the ambient light while monitoring the sensors voltage output.
  3. Verify that the voltage output is within the range of the specification.
  4. If not within the specified range, replace the B10B Ambient Light/Sunload Sensor.
scientia non olet · About LEMON Manuals