LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2011 >> 9-5 Turbo6 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> Lighting And Signaling Systems >> Fault diagnosis, fault codes >> DTC C0010: Reverse Gear Signal Circuit Not Plausible >> Component Testing >> Static Test

Static Test

  1. Ignition OFF, disconnect the harness connector at the B16 Backup Lamp Switch. Reversing gear engaged, test for less than 5 Ω at the B16 Backup Lamp Switch terminal 1 and terminal 2.
  2. If greater than the specified value replace the B16 Backup Lamp Switch.
  3. Reversing gear disengaged, test for infinite resistance at the B16 Backup Lamp Switch terminal 1 and terminal 2.
  4. If less than the specified value replace the B16 Backup Lamp Switch.
scientia non olet · About LEMON Manuals