LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2011 >> 9-5 Turbo6 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> Lighting And Signaling Systems >> Fault diagnosis, fault codes >> DTC B3596: Hazard Lamps Request Circuit Malfunction >> Component Testing >> Static Test

Static Test

  1. Ignition OFF, disconnect the harness connector at the S48D Multifunction Switch 2 - Instrument Panel.
  2. Test for infinite resistance between the S48D Multifunction Switch 2 - Instrument Panel terminal 4 and terminal 1.
  3. If less than the specified value, replace the S48D Multifunction Switch 2 - Instrument Panel.
  4. Press and hold the S48D Multifunction Switch 2 - Instrument Panel, test for less than 5 Ω of resistance between the S48D Multifunction Switch 2 - Instrument Panel terminal 4 and terminal 1.
  5. If not within the specified range, replace the S48D Multifunction Switch 2 - Instrument Panel.
scientia non olet · About LEMON Manuals