Circuit/System Description
The body control module (BCM) supplies a reference voltage to the backlight dimmer switch, which is part of the headlamp switch. When the backlight dimmer switch is placed in a desired brightness position, reference voltage is applied through the backlight dimmer switch rheostat to the BCM. The BCM interprets this voltage signal, then applies a pulse width modulated (PWM) voltage through the backlight lamp control circuit, and the LED dimming control circuit illuminating the LEDs and the components listed below, if equipped:
- Heated Seat Control Module - Driver
- Dome/Reading Lamps
- Dome/Reading Lamps - Row
- Sunroof Switch
- Sunroof Sunshade Switch
- Rear Window Sunshade Switch
- Sunroof Ventilation Switch
- Intrusion Sensor Defeat Switch
- Outside Rearview Mirror Switch
- Window Switch - Driver
- Rear Compartment Lid Release Switch - Interior
- Window Switch - Passenger
- Window Switch - Left Rear
- Window Switch - Right Rear
- Steering Wheel Control Switch
- Headlamp Switch
- Park Brake Control Switch
- Ignition Mode Switch
- Automatic Transmission Shift Lever
- Hazard Warning Switch
- Multifunction Switch - Instrument Panel 1
- Multifunction Switch - Instrument Panel 2
- Steering Wheel Controls Switch - Left
- Steering Wheel Controls Switch - Right