LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2011 >> 9-5 Turbo6 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Doors And Locks >> Fault diagnosis, symptoms >> Door Ajar Indicator Malfunction >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON, observe the scan tool Driver Door Ajar Switch parameter while opening and closing the driver door. The parameter should change between Active and Inactive.
  2. If the value does not change, refer to DRIVER DOOR AJAR SWITCH MALFUNCTION .
  3. Observe the scan tool Passenger Door Ajar Switch parameter while opening and closing the front passenger door. The parameter should change between Active and Inactive.
  4. If the value does not change, refer to PASSENGER DOOR AJAR SWITCH MALFUNCTION .
  5. Observe the scan tool Left Rear Door Ajar Switch and Right Rear Door Ajar Switch parameters while opening and closing the left and right rear doors. The parameters should change between Inactive and Active.
  6. If the appropriate value does not change, refer to REAR DOOR AJAR SWITCH MALFUNCTION .
scientia non olet · About LEMON Manuals