LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2011 >> 9-3X Standard >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Turbocharger System >> Repair Instructions >> Upper delivery pipe, charge air cooler >> To remove

To remove

  1. Raise the car.
  2. Remove the Spoiler shield, front. See SPOILER SHIELD .
  3. Detach the hose clamp on the lower junction hose from the charge air pipe.
    Fig 1: Illustration For Step 3-4
    G05053305Courtesy of SAAB-SCANIA OF AMERICA, INC.
  4. Remove the lower charge air pipe bracket from the fan cowling.
  5. Lower the car.
  6. Remove the upper engine cover.
  7. Detach the hose clamps to the upper junction hose and bend the hose aside.
    Fig 2: Illustration For Step 7-9
    G05543768Courtesy of SAAB-SCANIA OF AMERICA, INC.
  8. Remove the connector and the hose from the temperature/pressure sensor on the charge air pipe.
  9. Remove the charge air pipe upper bracket from the fan cowling.
  10. Lift away the delivery pipe.
scientia non olet · About LEMON Manuals