LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2011 >> 9-3X Standard >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Turbocharger System >> Repair Instructions >> Bypass valve diaphragm, B207E/L >> To remove

To remove

  1. Remove the mass air flow sensor connector and the hoses.
    Fig 1: Illustration For Step 1-2
    G05053320Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. Remove the air cleaner casing cover and the intake hose to the turbo.
  3. Remove the hose from the turbo bypass valve.
    Fig 2: Illustration For Step 3-4
    G05053321Courtesy of SAAB-SCANIA OF AMERICA, INC.
  4. Unscrew the valve's cover, holding the cover firmly when the bolts are removed.
  5. Lift the cover away and replace the parts.
Fig 3: Identifying Diaphragm Kit
G05053322Courtesy of SAAB-SCANIA OF AMERICA, INC.
scientia non olet · About LEMON Manuals