To fit
- Fit the radio unit (A):
Courtesy of SAAB-SCANIA OF AMERICA, INC.
- Unplug the connectors (C) and detach the antenna cable (D).
IMPORTANT:
Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to CONNECTORS, HANDLING AND INSPECTION .
- Fit the radio unit (A). There will be an audible click.
- Fit the retaining bolts (B)
- Position and fit the CENTRE AIR VENT, PANEL
.
- Carry out Procedure after control module replacement. See Measures after changing the control module .
- Check the function.