LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2011 >> 9-3X Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Telematics >> Diagnostic Information and Procedures >> Fault Diagnosis, General >> Diagnostic Concept >> Diagnostic tool

Diagnostic tool

The software has been subdivided. For Saab 900 and 9000 (version 44.000 and later) a 10 Mbyte memory card is used. For 9-5, 9-3, 9-3 Sport Saloon and SPS (version 102.000) a 32 Mbyte memory card is required. The subdivision gives assured functionality for systems in older cars and less validation work with new releases. Both cards can sit in the diagnostic tool. You switch between cards by starting the diagnostic tool, waiting until the introduction screen is shown and then pressing:

For 9-3 Sport Saloon (9440), connect the P-bus and I-bus are directly connected to the data link connector, which requires use of an adapter (CANdi) for the diagnostic tool. The increased complexity of the car has increased the demands on the diagnostic tool. The diagnostic tool has therefore been adapted more directly to various user situations. When Tech2 is used for car models other than the 9-3 Sport Saloon and 9-5 prior to MY06, the CANdi box must not be used.

scientia non olet · About LEMON Manuals