Rear electrical center 701 (REC): Connect

The electrical center is fed with a +30 supply from the engine bay electrical center (342) and grounded to grounding points G3 and G29. The electrical center is connected to the wiring harness via 7 connectors:

1. Body 1 (in diagram = B1)  to main wiring harness
   Fig 1: Identifying Rear Electrical Centre 701 (B1)

   Courtesy of SAAB-SCANIA OF AMERICA, INC.
2. Body 2 (in diagram = B2)  to main wiring harness
   Fig 2: Identifying Rear Electrical Centre 701 (B2)

   Courtesy of SAAB-SCANIA OF AMERICA, INC.
3. Body 3 (in diagram = B3)  to main wiring harness
   Fig 3: Identifying Rear Electrical Centre 701 (B3)

   Courtesy of SAAB-SCANIA OF AMERICA, INC.
4. Head 1 (in diagram = H1)  to roof wiring harness
   Fig 4: Identifying Rear Electrical Centre 701 (H1)

   Courtesy of SAAB-SCANIA OF AMERICA, INC.
5. Head 2 (in diagram = H2) 

   4D/5D to roof harness

   CV to main wiring harness

   Fig 5: Identifying Rear Electrical Centre 701 (H2)

   Courtesy of SAAB-SCANIA OF AMERICA, INC.
6. Rear (in diagram = R)  to rear wiring harness
   Fig 6: Identifying Rear Electrical Centre 701 (R)

   Courtesy of SAAB-SCANIA OF AMERICA, INC.
7. Tail (in diagram = T) 

   4D:  to the main wiring harness

   Fig 7: Identifying Rear Electrical Centre 701 - 4D (T)

   Courtesy of SAAB-SCANIA OF AMERICA, INC.

   5D:  to rear harness

Fig 8: Identifying Rear Electrical Centre 701 - 5D (T)

Courtesy of SAAB-SCANIA OF AMERICA, INC.

CV:  to rear harness

Fig 9: Identifying Rear Electrical Centre 701 - CV (T)

Courtesy of SAAB-SCANIA OF AMERICA, INC.

The connectors for the main and rear wiring harnesses each comprise four subconnectors, which are named A, B, C and D in the wiring diagrams, for example B1-B.

The TR-WH connector is used for a trailer connector. In some cases a special module, TR-MOD, is required.

The following current circuits are distributed by the electrical center:

+30 power supply, rear electrical center

+15 power supply, rear electrical center