LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2011 >> 9-3X Automatic >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Turbocharger System >> Repair Instructions >> Lower delivery pipe, charge air cooler >> To fit

To fit

IMPORTANT: To reduce the risk of hoses mounted on the delivery side of the turbocharger coming loose due to low friction at high air pressure, the hoses and connecting pieces must be cleaned thoroughly before fitting. Use a rag dampened with 93 160 907 Motip Dupli cleaning agent to wipe clean inside the ends of the hoses. Clean the connecting pieces as well. If hose clips are rusty or damaged, they must be replaced so the correct clamping force is maintained.
  1. Fit the hose and tighten the hose clamps.

    Tighten the bolts.

    Bolt tightening torque: 20 Nm (15 lbf ft) 

    Fig 1: Identifying Hose Clamps And Bolts
    G05053313Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. Fit the Spoiler shield, front. See SPOILER SHIELD .
  3. Lower the car.
scientia non olet · About LEMON Manuals