LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2010 >> 9-3X Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake System - FOOTBRAKE System >> Repair Instructions >> Vacuum pump, Z19 >> To fit

To fit

  1. Clean the sealing surfaces and fit the vacuum pump using new seals.

    Tightening torque: 9 Nm (7 lbf ft) 

    Fig 1: Illustration For Steps 1-2
    G05564209Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. Fit the hoses.
  3. Fit the insulation and upper engine cover.
scientia non olet · About LEMON Manuals