- Clear diagnostic trouble codes in all systems.
IMPORTANT:
Some diagnostic trouble codes can be generated if there is a voltage drop. These diagnostic trouble codes can be ignored and will not be regenerated after deletion.
- Set date and time.
- Synchronize the remote control code by inserting the key into the ignition.
IMPORTANT:
Draw the customer's attention to the fact that all remote controls must be synchronized by placing the key/keys in the ignition lock. If this is not done, the remote control will not work.
- Cars with pinch protection:
Program the pinch protection, see CALIBRATION OF PINCH PROTECTION
.
WARNING:
The trap protection is not active until the window lifters have been calibrated after a power failure.