To remove

Remove STEERING WHEEL MEMBER .
Remove brake pedal link bolt.

Fig 1: Identifying Brake Pedal Link Bolt
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Undo the brake servo bolts.

Fig 2: Identifying Brake Servo Bolts
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Manual gearbox: Remove the clutch master cylinder. Detach the pushrod from the clutch pedal. Use a pair of nose pliers with bent jaws.

Fig 3: Detaching Pushrod From Clutch Pedal
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Remove the pedal bracket.

Fig 4: Identifying Pedal Bracket Bulkhead
Courtesy of SAAB-SCANIA OF AMERICA, INC.