LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2010 >> 9-3X Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Telematics >> Repair Instructions >> Branch connector, aerial signal, GPS >> To fit

To fit

  1. Position the aerial signal branching piece (B).
    Fig 1: Removing/Installing Aerial Signal Branching Piece
    G00539152Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. Fit the nuts (A).
    IMPORTANT: Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector.
  3. Plug in the connector.
  4. Fit OnStar control module (673), 5D , OnStar control module (673), 4D  or OnStar control module (673), CV .
scientia non olet · About LEMON Manuals